Administration
98-165591-B
Chapter 4: Setup and operation
4-19
4444
4.8.4
To import and export a system configuration
If you need to reuse a configuration in another VSAT system, you can save the current
configuration to a file, which can then be loaded into another VSAT system. You can also
use this feature for backup purposes.
The configuration file contains all the settings you have entered during system setup:
satellite profiles, modem profiles, local IP setup, user permissions etc.
To save a configuration to a file, do as follows:
1. Select
ADMINISTRATION > Export/import config
.
2. Click the button
Export
. Follow the download instructions on the screen. You can use
this configuration file for upload to another VSAT system,
To load a configuration from a file, do as follows
:
1. Select
ADMINISTRATION > Export/import config
.
2. Click the button
Browse
and locate the configuration file (.cfg file) you want to upload.
Then click the button
Open
.
3. In the web interface click the button
Upload
.
To clone a system configuration, do as follows:
1. Reset to factory default, see next section for details.
2. Import a configuration from file, see section above.
4.8.5
Reset to factory default
To reset to factory default settings, do as follows:
1. Select
ADMINISTRATION > Factory default
.
• Navigation settings
• All added satellite profiles
• All added modem profiles
• Changes in the network setup
• User permissions
• Base Unit display: brightness setting
2. Click
Reset to factory default
.
You can also power cycle the EXPLORER 6075LX, see
Important
Load and save configurations can only be done with the same software
version in the units involved.
Important
Reset to factory default will delete or reset all the settings listed below!
