The web interface
98-165591-B
Chapter 4: Setup and operation
4-6
4444
Information fields on the Dashboard
DASHBOARD
Description
GNSS position
Position reported by the GNSS module or entered manually
Base orientation
Orientation of the mounting base relative to estimated North
Satellite profile
Name of the currently active satellite profile
Satellite position
Position of the satellite selected in Satellite profile
RX polarization
Left-hand circular (LHCP) or Right-hand circular (RHCP)
TX polarization
X-pol
RX RF frequency
Receiving frequency
LNB LO frequency
The LNB Local Oscillator frequency
BUC LO frequency
The BUC Local Oscillator frequency
Tracking RF frequency
Current RF tracking frequency
ACU part name,
Antenna part name,
ACU serial number,
Antenna serial number,
Software version
Part names, serial numbers for Base Unit and antenna, software
version of the VSAT system
POINTING
Description
Azimuth, elevation geo Current value for geographic azimuth and elevation
Azimuth, elevation rel
Current value for relative azimuth and elevation
MODEM
Description
Model
VSAT modem name, entered in SETTINGS > Modem profiles.
RX locked status
Shows whether or not the system has locked to the incoming
signal.
Status
Any status information received from the modem
RX IF frequency
Rx IF frequency read from the VSAT modem
TX allowed
Shows whether the VSAT modem allows the system to
transmit.
TX Mute
Muted or Not muted.
TX
Description
BUC TX
On or Off. Shows if the VSAT system has enabled the BUC or
not. It is the same TX ON/TX OFF that is shown in the display of
the Base Unit, see
