Cobalt Digital Inc Cobalt Qube 2, User Manual, Page: 164 / 218

Chapter 5
150
The second method is as follows.
1. On the Public Site screen, click View Users . The View User List
table appears.
2. Click the green globe icon next to the user’s name. A default
home page appears with the title “Welcome to <user>’s Home
Page”.
3. Click Edit This Page at the bottom. An authentication dialog
appears.
4. Enter your user name and password.
5. Click OK . The Page Builder window opens.
6. The left column displays a number tasks that you can perform on
the default home page file. For more details, see “Page Builder
window” on page 150.
You can also click Instructions on the left to access the online help
window.
7. To exit the Page Builder tool, click either Exit (to exit without
saving your changes) or Save and Exit (to save your changes
before exiting). The Public Site screen appears.
Page Builder window
There are four sections to the Page Builder window. See Figure 51.
• The left hand column is the Control Panel. In this section, you can
perform file activities, select existing blocks of your Web page to
edit, insert new blocks into your Web page or change the color of
your Web page. You can also access online instructions for using
the Page Builder tool.
• The top window to the right of the Control Panel is the Build
window. This window displays the Web page as it is being built.
• Below the Build window is the Edit window. You can view and edit
the details of a particular block of your Web page in the Edit
window.
• Below the Edit window is the Help window which displays help
messages when you click on the Active Assist question mark
icons.