BBG1070QS-OM (V1.8)
BBG-1070-QS PRODUCT MANUAL
3-21
Setup/Operating Instructions
BBG-1070-QS Function Menu List and Descriptions
(continued)
• Input PiP Video Size/Position Controls
The controls shown here allow manipulating the input scaling and
positioning of the selected PiP image before it is processed by the image
area ARC.
Note: This control affects only image positioning within the PiP image
area cell. It will not move an image to an area outside the
currently-defined PiP area cell.
Tally Lamp Insertion Controls
Provides controls for each PiP to insert tally indicator
“lamps” as overlays into the output video.
Note: • Tally lamp activation (ON/OFF and color control) is set using IP automation, or other external actions such as GPI (see
Event Actions Setup Controls (p. 3-49) for setting up tally lamp control). The controls here enable lamp overlay
insertion, and set size and position attributes. These controls do not control tally activation.
• Identical independent controls are provided for a Tally Lamp 1 and Tally Lamp 2 tally lamps. Therefore, only the Tally
Lamp 1 controls are shown here.
• PiP Configure Select/Clone
Individually selects any of the five PiP inputs to be selected for tally
insertion edits (as described below). Allows cloning settings to other PiPs.
Note: For multi-unit setup using Cascade Config mode/setup, Clone
Settings from any of the units in the chain can be cloned to any
unit in the chain (i.e., all units in the chain appear in the Clone
Settings From and Clone Settings To drop-downs). See Cascade
Config Setup Controls (p. 3-41) for more information.
Table 3-1
BBG-1070-QS Function Menu List — continued
