3
BBG-1002-UDX Function Menu List and Descriptions
3-42
BBG-1002-UDX PRODUCT MANUAL
BBG1002UDX-OM (V1.5)
Timecode
Provides timecode data extraction from various
sources, and provides formatting and re-insertion
controls for inserting the timecode into the output video.
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
SDI VITC
Detect/Extract
SDI ATC_LTC
Detect/Extract
SDI ATC_VITC
Detect/Extract
Priority/
Select
525i SDI
w/ VITC
Waveform
SDI VITC
Timecode
Proc/Embed
ATC_VITC
Timecode
Proc/Embed
ATC_LTC
Timecode
Proc/Embed
720p SDI
w/ATC_VITC
w/ATC_LTC
Insert
Control
Line
Number
Control
Buffer/
Format
ATC_VITC Insertion = Enabled
ATC_LTC Insertion = Enabled
ATC_VITC1 = Line 9 (default SMPTE 12M-2)
ATC_VITC2 = Line 8 (571) (default SMPTE 12M-2)
ATC_LTC = Line 10 (default SMPTE 12M-2)
BBG-1002-
UDX
525i 5994
w/ VITC
Waveform
720p 5994
w/ ATC_VITC
w/ ATC_LTC
Noting that the incoming video contains VITC
waveform timecode data (as shown in the status
display), set the Source Priority drop-down lists to
include VITC Waveform timecode data (Input VITC)
as a choice. This extracts VITC Waveform timecode
data from the incoming video.
In this example, it is desired to provide both SDI
ATC_VITC and ATC_LTC timecode data in the
converted HD output video. As such, set both
HD ATC VITC Insertion and HD ATC LTC Insertion
to Enabled.
In the example here, the line numbers are set to the
default SMPTE 12M-2-2008 recommended values.
A
B
Shown below is an example in which received 525i 5994 SDI video is being up-converted to 720p 5994. To re-format and
insert the timecode data, the following can be performed using the Timecode function. Each Timecode control is fully
described on the pages that follow.
A
A
B
B
Reference VITC
Detect/Extract
Free Run
(Internal Count)
Audio LTC
Detect/Extract
