9980CSC3G-OM (V1.4)
9980-CSC-3G PRODUCT MANUAL
3-11
Operating Instructions
9980-CSC-3G Function Menu List and Descriptions
Table 3-2
9980-CSC-3G Function Menu List
Input Video Controls
Allows manual or failover selection of card SDI
program video inputs and displays status and raster
format of received SDI video.
• Input Video Source
Selects the input video source to be applied to the card’s program video
input.
• SDI A and SDI B choices allow forced manual selection of
correspondingly SDI IN A or SDI IN B.
• Failover A to B sets main path preference of SDI IN A.
- If SDI IN A goes invalid, then SDI IN B is selected.
- If SDI IN A goes valid again, failover automatically reverts to
SDI IN A.
• Failover B to A sets main path preference of SDI IN B.
- If SDI IN B goes invalid, then SDI IN A is selected.
- If SDI IN B goes valid again, failover automatically reverts to
SDI IN B.
• SDI C and SDI D choices allow forced manual selection of
correspondingly SDI IN C or SDI IN D without failover choices.
Note: Failover criteria via this control is simple signal presence.
• Input Video Status
Displays input status of each video input, along with elapsed time of
signal acquire.
Input SDI Raster Size / Frame Rate Filtering
The controls shown below allow user filtering to only include selected raster or rate formats to be used as a program video
input.
SDI A thru SDI D Status show raster/format for all card inputs. If
signal is not present or is invalid, Unlocked is displayed. (These
status indications are also propagated to the Card Info pane.)
Note: Status display shows maximum card input complement.
Input complement is determined by rear I/O module used.
Default settings have all raster sizes and frame rates “checked”, thereby providing no filtering (exclusion.)
In the example below, only 720p and 29.97 are checked, filtering allowed input to only be 720p 29.97 (“720p half-rate”).
Note: Rates shown in selector are frame rates and not field rates.