9926-xHtoS-OM (V1.2)
9926-XHTOS PRODUCT MANUAL
3-27
Operating Instructions
9926-xHtoS Function Menu List and Descriptions
Output Audio Routing/Controls
Provides an audio crosspoint allowing the audio source
selection for each embedded audio output channel.
Also provides an output node Downmixer and Flex
Mixer which can be applied to output program audio.
Status display shows content type for each embedded
output channel for all 4 paths.
Provides an audio crosspoint allowing the audio source
selection for each embedded audio output channel.
Also provides an output node Downmixer and Flex
Mixer which can be applied to output program audio.
Note: •
Path 2 thru Path 4 – Emb Out Ch 2 thru Emb Out Ch 16 have controls identical to those described here for
Path 1 – Emb Out Ch 1. Therefore, only the Path 1 – Emb Out Ch 1 controls are shown here.
•
For each channel, its source and destination should be considered and appropriately set. Unused destination
channels should be set to the Silence selection.
•
Downmixer and Flex Bus choices shown in UI here are Output Audio downmixer and flex mix functions. These are
separate from downmixer and flex mix functions found in Input Audio function.
Table 3-1
9926-xHtoS Function Menu List — continued
• Status
For each SDI embedded output pair, shows content
presence and type.
• PCM indicates recognized PCM present.
• Dolby D or Dolby E indicates Dolby non-PCM
content is present.
• Non-PCM indicates non-PCM content.
• Unlocked indicates no lock/content detected (as in
cases where upstream device has removed or not
embedded any audio on the pair/group).
Note: If Frame Sync is set to provide Freeze or Flat
Field upon input LOS, upon pair unlock, pairs
here will indicate PCM, since PCM silence
audio will be inserted when frame sync inserts
a card-generated raster (such as cases of
input LOS).
SDI Embedded Output Group Enable/Disable
Allows enable/disable of embedded audio groups 1
thru 4 on card program video output to
accommodate some legacy downstream systems
that may not support all four embedded audio
groups.
