6-8
Section 6
Cuddy Cabin
Electrical
Plumbing
CAUTION
Correct a problem with the electrical
system before resetting a circuit
breaker.
Symptom
Possible Cause
Electrical component
will not function
Circuit breaker tripped or in the OFF position – correct the problem and reset; turn circuit
breaker on.
Dim or no lights
Circuit breaker tripped or in the OFF position – correct the problem and reset; turn circuit
breaker on.
Battery discharged – charge battery.
Generator will not start Battery switch in the OFF position – turn switch to the ON position.
Engine Problem – see your authorized Cobalt dealer.
No AC power
Circuit breakers tripped or in the OFF position – correct the problem and reset the shore
power inlet breaker or the breaker on the cabin distribution panel.
Make sure shore/generator selector switch is positioned correctly.
Ground fault circuit interrupter tripped – reset button on the outlet and test. If problem
exists – see your authorized Cobalt dealer.
Symptom
Possible Cause
No water at sink
Fresh water pump circuit breaker tripped or in the OFF position – correct the problem and
reset; turn circuit breaker on.
Fresh water tank empty.
Fresh water pump defective – see your authorized Cobalt dealer.
Filter plugged – clean filter located at the tank under mid-berth.
Low water pressure at
sink
Damaged fresh water pump, restriction or obstruction in water line – see your authorized
Cobalt dealer.
Head will not flush
Head circuit breaker tripped or in OFF position – correct the problem and reset; turn circuit
breaker ON.
Line to waste tank blocked – see your authorized Cobalt dealer.
COB_255_OM_forWeb.book Page 8 Friday, June 9, 2006 2:23 PM