Cobalt Digital Inc 24SD, Owner'S Manual

Page: 98 / 136

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3
-
42 24SD Owner’s Manual
COBALT
24SD
SPORT DECK
S
ECTION
3
Tie-down locations are for keeping your Cobalt boat
secured when moored. The bow eye and/or stern
eyes can also be used. Refer to
Section 3 ,
Anchoring .
MOTOR BOX ASSEMBLY OR
ELECTRIC MOTOR BOX
ASSEMBLY
Do not operate the motor box assembly if your ski
tow will interfere with its operation. Damage to the
motor box, hinges, ski tow and lifting unit can result.
Before opening the motor box, make sure the ski
tow is removed, no items are on top of the motor
box and any cushions, inserts or stored equipment
are secure or removed. Use the motor box support
to support the box once it is open. Be sure to return
the support back to its stow position and clear any
obstructions before closing the box. Wind and
conditions may allow the motor box to open beyond
its limits; use caution during these conditions.
The electric motor box assembly is controlled by its
switch at the helm. In the event of battery failure or
storage, the motor box can be opened manually.
TOOL KIT - OPTIONAL
A tool kit assists you with correcting minor
mechanical and electrical problems. For location of
the tool kit, refer to
Section 1 , Layout.
NOTICE: Only use properly
positioned slings to lift your
boat. Do not use deck cleats to
anchor or for towing. If towing,
only use the bow eye or the
stern eyes in a bridle manner.
A
DANGER
Avoid injury or death. DO NOT occupy or
operate an engine when the motor box is
open. The motor box assembly is a
machinery guard.
CAUTION
Avoid injury or damage to your boat. The
motor cover is heavy and may require
more than one person to lift. If lifting the
box manually, position one person at
each grab handle and lift straight up.
Place support into position.