Configuration
CoaXPress MC258x Camera Manual
6.8.3 CustomSensorClkEnable
Description: This feature enables/disables the camera clock overwriting by a customer selected value.
Access
Read / Write
Type:
Boolean
In:
Value
Description
On
The camera uses the sensor clock defined with feature '
CustomSensorClk
'.
Off
The camera uses the default sensor clock defined for the current CoaXPress link settings.
Out:
On/Off
Remark:
The 25CXP camera defines a default sensor clock for each CoaXPress link speed to run the cam
era in an optimal frame rate / image quality relation.
With the custom sensor clock feature this default value can be overwritten by a customer selected
value (see feature '
CustomSensorClk
' below). Overwriting the default sensor clock by a higher
sensor clock may result in substantial higher frame rates (depending on the frame size) but may
also downgrade the image quality. It is up to the user to find a setting that fits his needs.
This feature may be mainly of use for frame grabber boards with a max. link speed less than
CXP6.
6.8.4 CustomSensorClk
Description: Overwrites the default camera sensor clock by a customer defined value.
Access
Read/Write
Type:
Enumeration
In:
Enumeration
Description
Clk_50MHz
Set camera sensor clock to 50 MHz..
Clk_75MHz
Set camera sensor clock to 75 MHz. (default for CXP1-CXP3)
Clk_100MHz
Set camera sensor clock to 100 MHz.
Clk_125MHz
Set camera sensor clock to 125 MHz. (default for CXP5)
Clk_150MHz
Set camera sensor clock to 150 MHz. (default for CXP6)
Out:
Currently selected sensor clock.
Remark:
See above.
43
