Important: Always read and follow operating instructions.
• 3
10
12
13 14 15
16
18
17
20
22
19
9
Slide Locking Valve —
Locks and unlocks hori-
zontal/vertical slide and sets correct vertical/horizontal
position to maintain Duckhead
®
mount/demount tool to
wheel clearance.
10
DuckHead Mount/Demount Tool —
Used to
mount and demount tire from wheel.
11
Clamps —
Holds wheel to table top for tire chang-
ing. Position outward to allow outside clamping of
wheels.
12
Table Top —
Rotating chuck for tire changing.
13
Clamp Control Pedal —
Three-position pedal that
opens, holds or closes rim clamps.
14
Tower Tilt Pedal —
Two-position pedal that moves
tower forward or back.
15
Table Top Pedal —
Four-position pedal that controls
rotation of table top (forward-fast, forward-slow, off,
reverse).
16
Bead Lifting Tool —
Used to lift and position tire
bead correctly on Duckhead mount/demount tool.
17
Tire Bumper Guards —
Provides protective sur-
face when bead loosening tires.
18
Bead Loosener Shoe —
Pivoting shoe for loosen-
ing tire beads.
*19
Lube Bucket —
Dispenser for rubber lubricant.
20
Bead Loosener Handle —
Pull handle up or down
to control operation of bead loosener shoe.
21
Horizontal Disk-Assist Control Lever —
Locks
and unlocks horizontal slide. Used to position disk-assist
for bead lubrication, assist with tire mounting, and
demounting lower bead without tire tool.
22
Disk-Assist Hitch Pin (if equipped) —
Allows
extra clearance when tire changing large diameter
wheel assembles.
23
Disk-Assist Position Lock (if equipped) —
Locks
and unlocks horizontal slide to flip the disk-assist for
either upper or lower bead positioning.
*Not Shown
11
21
23