manualshive.com logo in svg

Coats CHD-4730, Operating And Maintenance Instructions Manual

The Coats CHD-4730 Operating And Maintenance Instructions Manual is a comprehensive guide for users of this exceptional product. You can easily download this manual from our website for free, enabling you to access vital information about your Coats CHD-4730 effortlessly.

Share
Download
background image

INDEX

1 - INTRODUCTION...............................................................................................................................................................3

 

1.1 - Technical data............................................................................................................................................3

2 - DESCRIPTION OF THE MACHINE....................................................................................................................................4 

3 - GENERAL ........................................................................................................................................................................5

 

3.1 - General safety rules...................................................................................................................................5

4 - TRANSPORT.....................................................................................................................................................................6

5 - UNPACKING...................................................................................................................................................................6 

6 - INSTALLATION ................................................................................................................................................................7

     6.1 Installation site....................................................................................................................................................................................7 

 

     6.2 Parts assembling................................................................................................................................................................................7

     6.3 Electrical connection.......................................................................................................................................................................8 

     6.4 Operation test...................................................................................................................................................................................9

7 - OPERATION.....................................................................................................................................................................10

     7.1 Notes for operation...........................................................................................................................................................................10 

 

     7.2 Rim clamping.....................................................................................................................................................................................11     

     7.3 Tubeless tires.......................................................................................................................................................................................12 

      

7.3.1 

Bead loosening and demounting with roller too

l.......................................................................................................

12

 

7.3.2 

Bead loosening and demounting with DoUBle roller tool.......................................................................................12

 

7.3.3 loosening and demounting with DoUBle tool................................................................................................................13

 

7.3.4tire mounting with roller tool.....................................................................................................................................14

 

   

7.3.5 

tire mounting with DoUBle tool.....................................................................................................................................16

     7.4 tube tires............................................................................................................................................................................................18

 

7.4.1 Bead breaking and tyre removing with DoUBle tool.....................................................................................................18

 

7.4.2 tire mounting with DoUBle tool....................................................................................................................................19

     7.5 tire assembly with 3 pieces split ring..................................................................................................................................................21

       

7.5.1 Bead loosening and demounting with DoUBle tool.......................................................................................................21 

 

7.5.2 tire mounting with DoUBle tool....................................................................................................................................22

     7.6 tire assembly 5 pieces split ring.........................................................................................................................................................23

 

7.6.1 Bead breaking and demounting with DoUBle tool........................................................................................................23

 

7.6.2 tire mounting with DoUBle tool....................................................................................................................................24 

   

    

8 - RESITING........................................................................................................................................................................25

9 - STORING........................................................................................................................................................................25 

10 - SCRAPPING.................................................................................................................................................................25

11- OIL TREATMENT.............................................................................................................................................................26

12 - FIRE FIGHTING MEANS.................................................................................................................................................26 

13 - ORDINARY MAINTENANCE.........................................................................................................................................26

      

14 - IDENTIFICATION OF THE TIRE CHANGER....................................................................................................................27

15 - ACCESSORIES.............................................................................................................................................................28 

ELECTRIC DIAGRAM...........................................................................................................................................................29

Summary of Contents for CHD-4730































Reviews:

No comments

Related manuals for CHD-4730

Mondolfo Ferro AS 924 Operator'S Manual preview
AS 924
Brand: Mondolfo Ferro Pages: 332
Accu-Turn 626 T Instruction Manual preview
626 T
Brand: Accu-Turn Pages: 34

Brands by name

Popular brands

Load more brands