ASSEMBLY INSTRUCTIONS
(#8 x 35mm - RBW)
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 215681KE (B3)
PAGE 3 OF 6
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
10
WRENCH
1PC
(13mm - RBW)
11
FLAT HEAD SCREW
10PCS
HARDWARE IDENTIFICATION
(
Φ
5/6" - RBW)
(
Φ
5/16" x 19 x 1.5mm - RBW)
(
Φ
5/16" x 88mm - RBW)
9
HEX NUT
8PCS
(4mm - RBW)
5
SHORT BOLT
(
Φ
5/16" - RBW)
7
FLAT WASHER
8PCS
8
THREADED BOLT
8PCS
2PCS
(
Φ
5/16" x 35mm - RBW)
6
LOCK WASHER
8PCS
3
FLAT WASHER
10PCS
(
Φ
5/16" x 19 x 1.5mm - RBW)
4
ALLEN WRENCH
1PC
ITEM :
215681KE (B1 - B3)
HARDWARE NAME
FIGURE
QTY
1
LONG BOLT
8PCS
(
Φ
5/16" x 63mm - RBW)
2
LOCK WASHER
10PCS
(
Φ
5/6" - RBW)
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 215681KE (B1)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
www.coastercompany.com
