Coaster 800436, Assembly Instruction Manual

Page: 9 / 9

ASSEMBLY INSTRUCTION
STEP 1 : Attach FOOT PADS (14) onto FRAME (A) & (B) by screwing into the legs. Assemble IRON TUBES (D)
between FRAMES (A) & (B) using BOLTS ( C ).
STEP 2: Assemble BACK PANEL (C ) between FRAMES (A) &(B) and using BOLTS (3).
STEP 3: Screw SIDE GLIDE RAILS ( T) on CABINET SIDE PANEL (H) using SCREWS (12). Screw SIDE GLIDE RAILS ( U)
on CABINET SIDE PANEL ( I ) using SCREW (12).
STEP 4: Insert DOWELS (13) into ( H) & (I) , then attach CABINET BOTTOM (J) using the CAM LOCKS ( 8).
STEP 5: Slide the CABINET BACK PANEL (K) between (H) & (I ) and place the CABINET TOP ( G) in place and secure
using SCREW (11).
STEP 6: Assemble the DRAWER BACK PANEL (N) with DRAWER SIDE PANELS ( O ) & ( P) using SCREW ( 11).
Slide BOTTOM DRAWER (Q) between ( O ) & ( P) . lnsert DOWELS (13) and WOOD DOWELS (1) into (O) & (P)
and attach the DRAWER DOOR PANEL (M) using the CAM LOCKS (9) . Finish the drawer by fastening the HANDLE (7)
onto the drawer using BOLT (6).
STEP 7 : Assemble SIDE GLIDE RAILS ( R ) & ( S ) on the drawer using SCREWS (12). STEP 7 : Assemble SIDE GLIDE RAILS ( R ) & ( S ) on the drawer using SCREWS (12).
STEP 8: Attach the BRACE (F) and the drawer frame completed in STEP 5 onto the IRON TUBES ( D)
using BOLTS(4). Fasten the SIDE GILDE RAILS ( V) onto KEYBOARD (L) using SCREWS (12).
STEP 9 : Attach the SIDE GLIDE RAILS (V) from the previous step onto IRON TUBES ( D)
using BOLTS (2). Then , slide in the drawers completed in STEP 7.
STEP 10: Attach the SUCTION CUPS (10) and place the GLASS TOP ( E) on top . Tighten all the hardware.
STEP 11 : Finished.
page 9 of 9