ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
Screw in cam bolt ( 6 ) to table leg ( B )
2.1) Place table top (A) upside down on soft surface.
Align and fasten 1pc of table leg (B) to table top (A)
using bolt (2), lock washer (3) and flat washer (4)
and fully tighten with Allen wrench (1)
2.2) Align & fix shelf ( C ) to the cam bolt (6) of table
leg (B) , as per diagram shown.
2.3) Align and fasten another piece of table leg (B) to
table top (A) using bolt (2), lock washer (3) &
flat washer (4) and fully tighten with Allen wrench
(1), with shelf ( C) fixed to the cam bolt (6) of
table leg (B) simultaneously.
STEP 3
STEP 4
3.1) Align and fasten the rest of 2pcs of table leg (B) to
Align and fasten pull to drawer front using screw ( 7) and
table top (A) using bolt (2), lock washer (3) & flat
fully tighten with Phillips head screw driver
washer (4) and fully tighten with Allen wrench (1),
( NOT INCLUDED ).
with shelf ( C) fixed to the cam bolt (6) of table
leg (B) simultaneously
3.2) Fasten shelf (C ) to table leg (B) using cam nut (5)
and fully tighten with Allen wrench ( 1 )
www.coastercompany.com
ITEM :
704417
PAGE 3 OF 3
