ITEM:
460228 (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 460228 (B2)
1
16PCS
2
16PCS
3
4PCS
4
8PCS
5
16PCS
6
16PCS
7
65PCS
8
24PCS
9
1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
ALLEN WRENCH
(4MM - BLK)
SHORT FLAT HEAD SCREW
(4 x 25mm - BLK)
LONG FLAT HEAD SCREW
(4 x 30mm - BLK)
WOOD DOWEL
(10 x 40mm)
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PAGE 3 OF 10
LONG BOLT
(Ø15 x 1/4 x 80mm - BLK)
HALF ROUND NUT
(1/4 x 22mm - BLK)
SHORT BOLT
(Ø15 x 1/4 x 35mm - BLK)
SHORT HEX HEAD SCREW
(Ø15 x 6.5 x 80mm - BLK)
LONG HEX HEAD SCREW
(Ø15 x 6.5 x 100mm - BLK)
1.Don’ t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
