background image

                  1.  When using beds as bunk beds, the ladder MUST be securely 

                       attached to the upper bunk rail at all times. 

                  2.  When using the beds as two (2) separate floor-standing beds, 

                       the ladder MUST be stored in a separate location where children 
                       cannot use the ladder in any manner. 

                  3.  DO NOT use, nor permit children to use, the ladder in any 
                       manner whatsoever, other than to access the top unit when 
                       used as bunk beds, and only if the ladder is securely attached 
                       to the top bunk rail, as set forth in the instructions. 

                  4.  Any misuse or unauthorized use of the ladder could result in 
                       serious or fatal injury. 

                  5.  Failure to follow the above WARNING, and/or failure to follow 
                       assembly instructions completely, will void any and all liability 
                       of COASTER COMPANY OF AMERICA for damages and injury to 
                       persons and property. 

www.coastercompany.com | 877- COASTER (262-7838)

PAGE 7 OF 7                     www.coastercompany.com

Summary of Contents for 460212








Reviews: