ITEM:
400897
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
AN
VANITY MIRROR
1PC
BN
BACK FRAME
1PC
CN
BOTTOM FRAME
1PC
DN
VANITY DESK
FROM BOX
ITEM#400896
1PC
HARDWARE IDENTIFICATION
1
6PCS
2
6PCS
3
6PCS
4
1PC
5
2PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 5
BOLT
(Ø1/4" x 30mm - RBW)
LOCK WASHER
(Ø1/4" - RBW)
FLAT HEAD SCREW
(Ø3.5 x 12mm - RBW)
FLAT WASHER
(Ø1/4" - RBW)
ALLEN WRENCH
(4MM - RBW)
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
15 MINUTES
PARTS IDENTIFICATION
ASSEMBLY TIME
