ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1 . Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast
&
easy assembly.
&
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishment.
�
�
IASSEMBL y TIME I 120 MINUTES I
PART S IDENTIFICATION
A BACKFRAME
1PC
D LEFT CROSSBAR
1PC
B FRONT FRAME
1PC
E BOTTOM FRAME
1PC
C RIGHT CROSSBAR
'1PC
F TOP GLASS
1PC
HARDWARE IDENTIFICATION
1
BOLT
@JIB
4PCS
3
SUCTION CUP
�
4PCS
(1/4"X1/2" - BLK)
BOLT
@)ut11l\ld
ALLEN WRENCH
2
4PCS
4
�
1PC
(1/4"x1-3/4" - BLK)
(4x4mm -BLK)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5
