ITEM:
301061Q (B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 6
COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
4
20PCS
3PCS
26PCS
1PC
(M8 x 30MM - RBW)
(M6 x 50MM - RBW)
SMALL ALLEN WRENCH
(M4 x 100MM - BLK)
5
1PC
BIG ALLEN WRENCH
(M5 x 65MM - BLK)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 301061Q (B2)
SHORT BOLT
LONG BOLT
FLAT HEAD SCREW
(M4 x 32MM - RBW)
ASSEMBLY INSTRUCTIONS
