www.coastercompany.com
ASSEMBLY INSTRUCTIONS
1
2
HARDWARE IDENTIFICATION
ASSEMBLY TIPS :
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instruction in the same sequence as numbered to assure fast & easy
assembly.
Warning!
1.Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2.This product is for home use only and not intended for commercial establishment.
PAGE 4 OF 11
3
4
7
8
9
10
SMALL LONG BOLT
24 PCS
SMALL MEDIUM BOLT
2 PCS
SMALL SHORT BOLT
16 PCS
CYLINDER NUT
26 PCS
METAL PIN
4 PCS
FLAT WASHER
2 PCS
PLASTIC CONNECTOR
40 PCS
SMALL ALLEN WRENCH
2 PCS
Z - B1 (BOX1)- Hardware pack is located in 2249 (B1)
12
WRENCH
1 PC
13
LADDER DOWEL
4 PCS
14
STOPPER GEAR
4 PCS
15
HEX NUT
12 PCS
16
METAL FRAME DOWEL
4 PCS
5
LARGE LONG BOLT
4 PCS
6
LARGE SHORT BOLT
8 PCS
11
BIG ALLEN WRENCH
1 PC
ITEM: 2249 (B1 & B2)
NOTE : RUBBER MALLET IS REQUIRED IN THE ASSEMBLY PROCESS ; HOWEVER
MANUFACTURER DOES NOT PROVIDE THIS ITEM.
