223121Q (B1&B2)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 223121Q (B2)
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
ITEM:
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast and easy assembly.
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
PAGE 3 OF 6
1
THREADED BOLT
(M8 x 100mm - RBW)
2
HEX NUT
(M8 x 15mm - RBW)
3
WRENCH
(M13 - SR)
4
PAN HEAD SCREW
8PCS
(4 x 32mm - SR)
NOTE:
Philips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
1PC
8PCS
8PCS
