ASSEMBLY INSTRUCTIONS
A
NIGHT STAND
www.coastercompany.com
PAGE 2 OF 2
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS. HOWEVER,
MANUFACTURER DOES NOT PROVIDE THIS ITEM.
1.1 Unscrew drawer pull from the back of drawer front using Phillips head screw driver (NOT INCLUDED).
1.2 Align and fasten drawer pull to drawer front using screw and fully tighten with Phillips head scew driver (NOT INCLUDED).
STEP 2
Complete.
STEP 1
ITEM :
203942
PARTS IDENTIFICATION
1 PC
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
