ASSEMBLY INSTRUCTIONS
www.coastercompany.com
PAGE 5 OF 6
R
STEP 3
STEP 4
'T' Runner
STEP 4.2
STEP 4.1
STEP 4.3
K
STEP 3.2
STEP 3.1
'T' Runner
'T' Runner
STEP 3.3
D
H
K
H
9
H
O
8
D
M
H
O
K
K
H
O
D
10
10
L
L
L
ITEM :
203471KE (B1 ~ B3)
4.1 Slide and push the footboard drawer box (O) into place until it is fully and evenly closed.
4.2 Align and fasten the drawer glide to drawer bottom trestle bar (H) using short flat head screw (8)
and tighten with Phillips head screw driver (10) (NOT INCLUDED)
NOTE : Pull the drawer box (O) out a little bit and make sure the drawer glide is center prior to
starting of assembly.
4.3 After completing the drawer alignment,adjust the leveler of the drawer bottom trestle bar support (K)
to touch the floor.
3.1 Align and fasten drawer bottom trestle bar support with leveler (K) to drawer bottom trestle bar
support (L) and drawer bottom trestle bar (H) by turning clockwise until tight.
3.2 Align and fasten drawer bottom trestle bar (H) to 'U' bracket at bed rail (M) using long flat head
screw (9) and tighten with Phillips head screw driver (10) (NOT INCLUDED)
3.3 Turn the drawer glide (attached to footboard 'D') outward.
