PAGE 4 OF 4
ANTI - TIPPING KIT
www.coastercompany.com
PARTS IDENTIFICATION:
HARDWARE IDENTIFICATION:
A
SERVER
1PC
2
SHORT SCREW
1PC
3
LONG SCREW
1PC
4
CABLE TIE
1PC
1
L BRACKET
2PCS
STEP 2
STEP 1
This tip restraint must be attached to a wall
stud using long screw enclosed.
Attach a bracket securely to the back top rail of the server
using short screw provided, through the smaller hole.
Locate the other bracket on the wall over a wall stud and two
inches below the mounting bracket secured to the back of
server. Attached to the wall stud using the long screw
provided, through the smaller hole.
1
WALL
A
2
4
4
STEP 3
Place the server into position so both mounting brackets are vertically in line. Lace the end of the restraint strap through the
larger hole in each mounting bracket. Bring both ends together and slide the flat end through the locking end and draw it
through until all slack is removed. Confirm that the strap is securely laced and locked.
3
WALL
