Lockpick provides an input on the module for a 2
nd
rear camera video input that allows an
extended view that you can enable or disable on demand using on screen menu options.
Connect your 2
nd
rear camera to the video connection on the Lockpick module (see
installation diagram) and power the camera from the rear camera power provided on the
Lockpick harness.
8.
If you want to add a front camera or left and right side cameras to your vehicle, the Lockpick is
prewired and programmed for exciting options
. The Lockpick harness has a 12V power output
labeled ADDITIONAL CAM POWER 12V+ to automatically provide the power needs of your
front and side cameras or to provide power and control of an interior baby camera if desired.
Connect the power needs of your additional cameras to the camera power output and attach
the GROUND connection of your camera to the GROUND connection provided for you on the
Lockpick harness. Connect the video from your cameras to the RCA video inputs labeled on
your Lockpick module. (see installation diagram)
9.
The A/V inputs on your Lockpick module provide simple connection of your aftermarket DVD,
video game or other mobile multimedia source.
Connect your device to the stereo Audio and
video inputs on your Lockpick module for full multimedia action
.
10.
Also present on your Lockpick harness is a 12V ACC output connection.
This ACC output is
created by the Lockpick and can be used as a convenient 12V switched power source for many
of your accessories. It is rated for a constant 1.5 AMPs and will automatically turn on and off at
the proper times of your vehicle use. If your power needs are greater than 1.5 Amps, you may
use the CONSTANT 12V output conveniently provided by the Lockpick harness and switch it on
and off through a relay powered by the ACC power output of the Lockpick harness.
**NOTE:
The connections for 12V Constant Battery power (YELLOW), ACC Ignition power (RED),
GROUND (BLACK), Reverse/2
ND
REVERSE power(RED W/STRIPE), Front/Bab/Turn signal cam power
(ORANGE W/STRIPE), are provided as a BONUS in your wiring harness for you to use when connecting
additional accessories such as a DVD player, Game, Cameras, Radar detector, etc., without worry that
they might drain your battery when the car is turned off. The ACC wire can power up to 1.5 Amps
constant. Higher loads should be connected with a relay.
** Do not attach the Constant or ACC wires directly to the vehicle wiring or ignition switch. The
Lockpick is plug and play for standard DVD/NAV/VIDEO/ /CAM unblocking and does not require
connections for power or ground. Connecting these Lockpick outputs to the vehicle wiring can damage
the unit and cause improper operations.
On Jeep Crysler vehicles equipped with an Uconnect 8.4 " with software updated to the MY2017
version, you can only manually activate the override from the Lockpick menu.
When using GPS navigation, the override function must be switched off.
