background image

 

12 

PRODUCT & CARE GUIDE 

Your  Authorized  Dealer  carries  a  wide  variety  of  care  and 
maintenance  products.  For  more  information  please  contact 
your Dealer.

 

REQUIRED FILTER MAINTENANCE 

Your  new  hot  tub  is  equipped  with  a  filter  cartridge.  To  ensure 
maximum water quality at all times, you should replace the filter 
cartridge  every  six  months,  or  earlier  as  necessary.  The  filter 
cartridge is designed to be thrown away! Attempts to re-use the 
filter cartridge may result in the re-release of unwanted particles 
back into the hot tub. 

PLEATCO DUAL CORE FILTERS 

Your hot tub/spa comes with a premium filter.  Most come with 
equipped with a Pleatco DualCore Filter, which does a better job 
of  cleaning  your  spa  water  than  any  other  filter cartridge.    The 
DualCore filter has two layers of filtration media, the outer layer 
and  the  inner  layer.    Both  are  engineered  to  remove  different 
particles from your water.   

 

The outer core is similar to a traditional filter which traps larger 
debris, while the inner core filters the water for particles down to 
3  microns  in  size.    The  inner  core  is  easily  removed  and  both 
filter media can be cleaned.  
 
Keeping  your  spa  water  clean  and  refreshing  is  extremely  im-
portant for your enjoyment of your hot tub.  Our hot tubs come 
with only the best filters available in order to ensure your satis-
faction.   

REQUIRED WATER REPLACEMENT 

You  should  replace  the  hot  tub’s  water  every  3-6  months.  The 
frequency  will  depend  on  a  number  of  variables  including  fre-
quency of use, number of bathers and attention paid to the wa-
ter  quality  maintenance.  You  will  know  it  is  time  for  a  change 
when  you  can  no  longer  get  the  normal  feel  or  sparkle  to  the 
water, even though the key water balance measurements are all 
within the recommended ranges. 

HEADREST / PILLOW CARE 

The pillows can be removed for easy cleaning and maintenance. 
All pillows have plugs within the pillow itself. To remove the pil-
low, grab the bottom edge firmly and pull outward. This will allow 
the  pillows  to  pop-out  from  the  receptacle  in  the  spa  shell.  To 
reinstall the pillow you will align the pillow plug with the recepta-
cle. Press/hit the front side of the pillow firmly, which will insert 
the plug back into the receptacle. 

 

Proper water chemistry must be maintained. Your hot tub 
pillows are easily and quickly damaged when exposed to 
unbalanced  spa  water.   

If you suspect that your chemi-

cals  may  be  unbalanced,  remove  your  pillows  immediately 
until the water has been restored to suggested conditions. 

 

Do not sit on the pillows 

 

Do not pull on the pillows 

OWNER’S MANUAL 

2020 

 

Pillows  should  be  cleaned  using  a  soft  cloth  and  mild  soap, 
then wiped with a conditioner. We recommend that pillows be 
washed each time you drain your spa. 

This  Limited  Warranty  is  void  if    failure  is  caused  by  accident, 
acts of nature, acts of God, or other causes beyond the control of 
CSMI. Neglect, misuse and abuse include any installation, oper-
ation,  or  maintenance  of  the spa  other  than  in  accordance  with 
the  instructions  contained  in  the  owner’s  manual  provided  with 
the spa, including, but not limited to damage caused by operation 
outside  the  range  of  34  degrees  Fahrenheit  and  116  degrees 
Fahrenheit or 1 degree Celsius and 47 degrees Celsius . 
 
Please  be  advised  that  the  Spa  Warranty  will  become  void  if 
Coast  Spas  or  any  of  its selling  or  servicing  agents determines 
that  the spa  has  been  exposed  to  Hydrogen  Peroxide,  TriChlor 
or any substance using it as an ingredient proven to be danger-
ous to the Spa. Any condition arising from the use of Hydrogen 
Peroxide or TriChlor on the Spa is not a warrantable defect.  

HOT TUB INTERIOR 

Your  hot  tub  has a  fiberglass  reinforced  acrylic  shell.  Generally 
dirt  and stains  will  not  adhere  to  the surface.  To  properly clean 
the surface, we recommend wiping it with a soft damp cloth (or 
sponge)  using  household  soap  or  liquid  detergent  and  rinsing 
thoroughly  with  fresh  water.  Stubborn  dirt  or  stains  may  be  re-
moved  by  using  Spic  &  Span  adequately  dissolved  in  water.  
Contact your dealer and inquire about maintenance packages. 

 
DO  NOT 

use any cleaning products containing abrasives or 

solvents,  since  these  could  damage  the  surface.  Harsh  chemi-
cals  should  never  be  used  on  acrylic  surfaces.  Damage  to  the 
shell due to the use of harsh chemicals is not covered under the 
warranty. 
 

DO NOT 

leave your hot tub drained and in direct sunlight for 

extended periods of time. Extreme heat could cause damage to 
the acrylic surface and may induce an effect known as “crazing”. 

STAINLESS STEEL CONTROLS AND COMPONENTS ABOVE THE 
WATER LINE 

To preserve the stainless steel finish of the controls and compo-
nents above the water line, we recommend they be wiped with a 
dry soft  cloth after each use of your hot tub.  In addition, off-gas 
your  tub  by  removing  the  cover  for  approximately  30  minutes 
multiple  times  per  week  (if  not  in  use)  and  after  every  shock 
treatment. 

CABINET CARE 

Never spray cabinets with a high-pressure garden hose or pres-
sure washer for any reason. This action may induce an electrical 
short in the hot tub’s electrical equipment.

 

CEDAR CABINET 

Our  cedar  cabinets  are  made  from  top  quality  Western  Cedar 
and  manufactured  and  stained  at  our  factory.  With  proper  care 
and maintenance, your cedar cabinet should maintain its beauty 
for  many  years.  Manufacturer  recommends  touch-up  or  re-
staining  of  the  cabinet  every  three  to  four  years  depending  on 
your  environment.  Contact  your  Dealer  for  re-staining  proce-
dures.

 

VINYL CABINET 

Vinyl  cabinets  are  made  of  a  rigid  polymer  that  combines  the 
durability of plastic with the beauty of real wood. This cabinet is 

Summary of Contents for INFINITY EDGE SWIM




























Reviews: