3
T e c h n i c a l B u l l e t i n
C o a c h C o m m
Connecting Your RT Cable
Note:
For customers with only one RT rack, mount the rack to the highest point on the mast and connect only one
of the RT cables in the bundle from the Cart’s rear patch panel. (You may use either red or blue, the color on
the cable does not matter, but you should NOT use both.)
Loading Your Configuration File
Only load your CoachComm configuration file (saved from X-Ware) to the top (primary) Control Unit (CU). Loading the file to the
bottom (secondary) CU may cause system malfunction. Once loaded to the primary CU, the configuration will be automatically active
on the secondary CU and on other devices.
Discard Your CoachComm USB Flash Drive
The flash drive originally provided with your X-System—fastened on a green or blue lanyard—has functioned inconsistently
when inserted into the front of the CU to load configuration files. Please back up any files saved to this flash drive, then discard it.
CoachComm will soon provide a replacement flash drive for you.
Be sure that any flash drive inserted into the front of the CU is fully inserted and securely seated in the port; do not bump or jar the
drive while it is inserted, or you may experience a loss in connection.
The RT cable from the cart’s rear patch panel connects to the X-NET IN port of the first RT.
IMPORTANT:
DO NOT connect this cable to an RT LOOP port.
CoachComm, LLC
205 Technology Parkway
Auburn, Alabama 36830 USA
www.coachcomm.com
Toll-Free 1.800.749.2761
Fax 1.888.329.2658
COPYRIGHT © 2017 CoachComm, LLC. All rights reserved. The X-System™ word mark is a trademark of CoachComm, LLC. All other trademarks
are property of their respective owners. Document Reference: 2017.09 D0000376_B
