CoachComm Tempest NG Sideline User Manual Download Page 30

Page: 30 / 64

Tempest NG User Manual v1.2013

Components

Front Panel Lock

— The user may desire to lock the buttons on the front of the BaseStation to keep accidental or undesired

changes from occurring within the menus. To unlock the base, the user must press and hold the Menu and Enter keys
simultaneously for two (2) seconds.

Tech Menu

— The Tech Menu consists of settings and information vital to the system’s operational status. Changes to these

settings can and will affect the operational performance of the system. it is highly recommended you consult with a
CoachComm technician before making adjustments in the Tech Menu.

Consult with a CoachComm technician before making changes to any of the Tech Menu settings!

Radio Configuration

- provides access to certain radio settings such as the Network Number, Lockout Key and Transmit

Power; these settings are set at the factory and should only be changed with the guidance of a CoachComm technician.

Security Settings -

each wireless BaseStation and corresponding BeltPacks should have matching security codes.

Diagnostic Mode

- provides a snapshot of BaseStation information such as radio version and firmware.

(For more

information on Diagnostic Mode see page 51 of this user manual.)

Factory Default

- allows a user to reset diffferent types of system defaults and settings.

Echo Cancellation

- allows the Echo Cancellation within the system to be turned OFF and ON; the default and recommended

setting is “All ON”.

Summary of Contents for Tempest NG Sideline

































































Search results

Summary of Contents for Tempest NG Sideline

Reviews:

Related manuals for Tempest NG Sideline

Brands by name

Popular brands

CoachComm Tempest NG Sideline, User Manual

Search results

Summary of Contents for Tempest NG Sideline

Reviews:

Related manuals for Tempest NG Sideline

Brands by name

Popular brands