background image

Copyright © CO2Meter, Inc. All Rights Reserved 

PAGE 3 of 1

0

 

INTRODUCTION

 

Congratulations on your purchase of the CO2Meter SAN-13 Carbon Dioxide Leak Detector. 
The SAN-13 is designed to detect leaks in CO2 systems like supply lines, cylinders, bulk tanks, or 
any enclosed space that CO2 is stored in or runs through. It is used in a variety of applications and 
industries such as beverage, wineries, breweries, indoor agriculture, refrigeration, and many others. 

The SAN-13 CO2 Leak Detector features advanced NDIR sensor technology providing accurate, 
reliable, and fast readings of even the smallest CO2 leaks.  

The  SAN-13 is shipped fully tested and calibrated and, with proper use, will provide years of 
reliable service. 

FEATURES

 

NDIR Sensor Technology taking 20 readings per second

Audible and Visual Indicator of CO2 leak

Two sensitivity modes, enabling quick and easy location of large and small  leaks

Large OLED Display

Rechargeable Li-Ion batteries with a 12-hour battery  life

Dual calibration methods: Ambient  Air or Nitrogen

Automatic power-off at 5 minutes to conserve battery life

Extremely Small, Compact Design

Rugged design with protective rubber enclosure

Heavy duty metal clip

IP54 housing to protect against dust, rain or splashdown

Removable serpentine probe with thread

APPLICATIONS

 

Carbonated beverage delivery systems

Wineries, breweries, and bakeries

CO2 refrigeration service

Bulk CO2 manufacturing, delivery, and service

General leak detection (using CO2 as test gas)

INCLUDES

 

SAN-13 CO2 Leak Detector

Calibration Certificate

American USB Plug

USB Charging Cable

Soft Side Zip-Up Traveling Case

Summary of Contents for SAN-13











Reviews: