3
Welcome
Thank you for purchasing our meter. CO2Meter, Inc. is a Florida based business specializing in the
design and manufacturing of gas detection and monitoring devices – mainly CO2. Our approach is
one based in the science of gas and how best to accurately and repeatedly measure that gas for the
end users purposes. Our business partners in agriculture, HVAC, science, safety, research,
pharmaceuticals, beverage, and other fields find our devices to be highly accurate and cost effective.
We approach each customer’s application as a unique opportunity to understand, educate, and
provide product solutions that meet the customers’ needs while exceeding their expectations for
reliability and service. Our continued product innovation in combination with our “customer first”
focus allows CO2Meter, Inc. to continue to provide solutions for the future.
Based in Ormond Beach, FL, CO2Meter, Inc. is committed to the success of our customers; the
health, welfare, and prosperity of our talented employees; and the continued development of our
local community.
CO2Meter, Inc. appreciates your business and looks forward to working with you and your team in
the future.
Please take some time to read through this manual in order to become familiar with your meter.
Pay special attention to the important safeguards below.
Important
Safeguards
To reduce the risk of fire, electrical shock and/or injury, basic safety precautions should always be
followed when using electrical appliances, including the following:
1.
READ ALL INSTRUCTIONS BEFORE USING THIS METER.
2.
INSTALL GasLab® SOFTWARE BEFORE CONNECTING METER TO A COMPUTER.
3.
Charge rechargeable meters for at least 5‐8 hours before use.
4.
The rechargeable data loggers contain a lithium polymer (Li‐Ion) battery. Do not expose to
extreme heat or cold.
5.
The Li‐Ion battery is not user‐replaceable. Please do not attempt to open the meter and
replace the battery.
6.
Do not use rechargeable AA batteries.
7.
For models using AA batteries, do not store the meter with the AA Alkaline batteries
installed to prevent the potential for battery leakage.
8.
Use only the supplied 5/6VDC international wall power supply adapter. Precisely 5/6V
must be applied to the meter. Other voltages can cause permanent damage.
9.
The meter is not designed for outdoor use.
10.
Do not allow the meter to be exposed to water.
11.
Do not operate the meter with the enclosure opened.
12.
Do not operate the meter if it is malfunctioning.
13.
Use of this device in environments above 95% humidity may cause irreparable damage to
the components.
SAVE THESE INSTRUCTIONS
