4
EN
GL
IS
H
2) Electrical safety
a) The power tool’s plug must fit correctly into the wall socket. Never modify the plug
in any way. Never use an adaptor together with earthed power tools. Unmodified
plugs and suitable wall sockets minimize the risk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens and
refrigerators. There is an increased risk of receiving an electrical shock if your body
is earthed.
c) Do not expose the power tool to rain or other wet conditions. If water gets inside
it increases the risk of electric shock.
d) Do not abuse the mains lead. Never use the lead to carry the tool or pull the plug
from a wall socket. Keep the lead away from heat, oil, sharp edges and moving
parts. Damaged or tangled leads increase the risk of electric shock.
e) When using power tools outdoors, use an extension lead that is suitable for
this purpose. The use of an extension lead designed for outdoor use decreases
the risk of electric shocks.
f) If the use of the power tool in a wet environment is unavoidable, a wall socket
equipped with a residual current device (RCD) should be used.
Using an RCD significantly reduces the chances of you receiving an electric shock.
3) Personal safety
a) Pay attention to what you are doing and use common sense when using power
tools. Never use power tools if you are tired or under the influence of drugs,
alcohol or medication. One moment of inattention while using a power tool may
result in serious injury.
b) Wear protective clothing. Always wear safety glasses. Using protective clothing
such as dust masks, non-slip safety shoes, helmets and ear defenders decreases
the risk of injury.
c) Avoid accidental starts. Make sure that the power switch is set to
OFF
before
plugging the power tool into a wall socket, fitting the battery or picking up/carrying
the power tool. Carrying a power tool with your finger on the power switch/trigger
or connecting the power tool to a wall socket when the power switch/trigger is set
to
ON
is inviting an accident.
d) Remove all service tools/keys before switching on the power tool. A service tool
left on any moving part of the power tool may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced at all times.
This ensures better control over the power tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose-fitting clothes, jewellery or long
hair could become caught in moving parts.
g) If equipment for dust extraction or collecting is available make sure it is connected
and used properly. Using technical aids may decrease dust related hazards.
