9
EN
G
LI
SH
Connecting the exhaust hose
Note:
• The exhaust hose should be used when the COOL or AUTO functions are selected
in order to divert warm exhaust air.
• The exhaust hose does
not
need to be mounted when the FAN or DRY functions
are used.
• The exhaust hose can be mounted in a window or a simple temporary set up can
be used to prop up the exhaust hose to discharge the excess warm exhaust air.
For permanent wall installation, refer to the instructions below.
3. Mark an installation hole in the wall using
adapter 4
as a template. Cut out the hole.
4. Install
adapter 4
into the hole.
5. Attach
adapter 3
to the exhaust hose
and connect the hose to the adapter in
the wall. Close the lid of the adapter when
the exhaust hose is not in use.
6. Make sure that the hose has
the recommended amount of floor
clearance when installing.
7. Do not allow any bends in the hose.
1. Attach
adapter 1
to the exhaust hose.
2. Slide the hose’s coupling adapter onto
the exhaust attachment point (6).
