EN
G
LI
S
H
Use
1. The impact wrench comes with 4 covers (17, 19, 21 and 22 mm). Firmly attach
the desired cover before plugging the impact wrench in the wall socket.
2. Firmly attach the cover on the impact wrench driving pin so that the catch
tightly locks the cover.
3. Press the cover against the bolt that is to be loosened or tightened. Hold the
impact wrench in line with the bolt.
4. The impact wrench is reversible. Press the lower section of the circuit breaker
switch in to rotate clockwise (tighten the bolt), and press the upper section of
the circuit breaker in to rotate anti-clockwise (loosen the bolt). ATTENTION!
Allow the motor to come to a complete stop before moving in the opposite
direction.
5. Release the circuit breaker to stop the tool. Pull out the plug when done.
Care and maintenance
• Pull out the plug before carrying out any care or maintenance on the tool.
• When necessary clean with a lightly damp cloth, soaked in water and
detergent.
• Keep the motor’s ventilation holes free from dust and debris to avoid
overheating the motor.
• Clean covers when necessary. At the same time watch for cracks forming
on them – dispose of damaged covers.
Disposal
Follow local ordinances when disposing of this product. If you are
unsure about how to dispose of this product contact your municipality.
Specifications
Model name
CT-2632-UK / CT-2632
Power supply
230 V, 50 Hz
Output
900 W
Drive size
1/2” square
Revs
2100 RPM (no load)
Noise level (LpA)
97 dB
Noise output (LwA)
108 dB
Vibration
2.5 m/s²
Summary of Contents for CT-2632
Page 2: ......
