EN
G
LI
SH
9
Sensor unit
• Place the sensor in a location that is
protected from direct sunlight and rain.
• Mount the sensor at least 1.5 m (5 ft)
above ground, if possible.
• Screw a screw nearly all the way into the wall,
leaving the head sticking out a little and hang
the sensor using the hanging hole (27).
Instructions for use
Settings
1. In normal mode, hold in [ SET ] for 3 seconds to enter
the settings mode.
2. Press or hold in [
▲
] or [
▼
] to change the value.
Confirm each stage with [ SET ].
If none of the buttons is pressed within 20 seconds, the settings are
saved and the weather station reverts to normal display mode.
Set the following in sequential order:
-
Hour:
Hour setting
-
Minute:
Minute setting
-
Year:
Year setting
-
MD/DM:
Set the order of how the day and month are displayed.
-
Month:
Month setting
-
Day:
Day setting
-
Pressure unit:
Set which units of measurement the atmospheric
press is displayed in (hPa/mb, mmHg or inHg)
Selecting the units of temperature
Press [
▲
] to toggle between units of temperature measurement in
degrees Celsius (ºC) and degrees Fahrenheit (ºF).
