8
EN
GL
IS
H
5. Slide the rubber bushing onto the end of the shaft, lining the holes in the bushing
up with the holes in the shaft. The bushing has a tongue along its length which
slots into a notch in the hole of the thrower housing. Slide the shaft into the
thrower housing and fasten it with the two screws.
Note:
Since the mains lead
runs along the inside of the shaft, you might need to hold the lead out of the way
using a long slender implement to avoid punturing it with the screws.
6. Attach the auxiliary handle in the position that suits you best.
Summary of Contents for 31-8614
Page 2: ...2...