7
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Activity Den continued...
10
11
12
13
13
Insert the top end of the Tube into the Upper
Joint. Ensure the Pop-pin correctly engages.
Insert the bottom of the Tube into the Lower Joint.
Ensure the Pop-pin correctly engages.
Repeat steps 7-11 for the remaining corner
where the Upper and Lower Joints with Pop-Pin
holes were used.
Assemble the remaining vertical tubes by
inserting the tubes into the remaining vertical
sleeves. Insert the top of the tube into the Upper
Joints, then insert the bottom of the tube into the
Lower Joints.
Ensure all tubes are assembled correctly and
secure before use.
10a.
11a.
12a.
13a.
13a.
NOTE:
It is a little harder to assemble the last vertical tube. If you are
having trouble, stand on the lower joint with your foot, lift the vertical tube
with both hands and insert the bottom of the tube into the lower joint.
The Activity Den is now ready for use.
