5
Assembly / Operating Instructions
To set up travel cot
1.
Unzip bag. Remove travel cot and stand unit upright.
2. Unhook velcro tabs.
3.
Remove mattress pad.
IMPORTANT!
Before pushing down centre hub into locked posiion,
check that thesupport legs are positioned flat on the floor to
successfully lock dow the centre hub.
4.
Separate tops of corner posts. Ensure centre support is raised
at least 460mm.
5.
Grasp centre of each side and end rail, lift to ‘snap’ into
correct position. If ‘snapping’ of the side and end rail locks
does not occur easily, recheck that the centrehub is raised to
recommended height before proceeding.
6.
Press down on centre hub to lock it into position. Check and
ensure all the locking devices are fully engaged. If not, lift the
centre support and repeat steps 5 and 6.
IM 4 in 1 Geo White 074230-247.indd 5
13/01/2014 14:23:14 PM
