6
5
1.) Lift the safety clips from underneath and pull outwards until the clips are
facing down.
2.) Lift off the feeder chute lid and remove the juicer-extracting and filter.
3.) Insert the accessory connector, make sure the raised sections are
outwards facing and are in line with the safety clips.
4.) Lift the accessory clips and place them into the accessory connector
until the grooves meet, once the clips are secure, push the clips down
to lock the connector into place.
5.) Insert the blender into the accessory connector and twist counter
clockwise until the grinder or chopper is secure.
6.) When using the blender, slice food into smaller pieces to prolong the
life of its motor. If the blades are stuck, switch off the unit, and remove
any obstructions. Be careful of the sharp blades.
7.) Safety Interlocking Switch: The unit will not work if the safety clips are
not properly locked.
8.) Once you have finished blending, twist the blender clockwise and
remove it from the accessory connector.
9.) If you have any type of food that needs sifting, place the Nano Sieve in the
Blender Cup. Place the food in the Nano Sieve and lock the lid in place .
Do not use the Nano Sieve to make smoothies or shakes.
Grinding Cup
Chopping Cup
Switch
Nano Sieve
Clean and Care
1.) Lift the safety clips from underneath and pull outwards until the clips are
facing down.
2.) Lift off the feeder chute lid and remove the juice-extracting filter.
3.) Insert the accessory connector, make sure the raised sections are
outwards facing and are in line with the safety clips.
4.) Separate the grinder’s or chopper’s base from its cup by holding the
base and turning the cup counter clockwise. Turn the base upside down
and fill the cup with the desired contents, then re-assemble the
grinder or chopper base by turning clockwise.
5.) Insert the complete grinder or chopper into the accessory connector
and twist counter clockwise until the grinder or chopper is secure.
6.) After grinding or chopping, twist the grinder or chopper clockwise and
pull it away from the cup.
1.) Wipe the base unit with a damp cloth, if necessary, use a little mild
detergent.
2.) Do not immerse the base unit in water, do not allow liquid to get inside
it.
3.) The other parts should be washed in hot soapy water. Rinse well and
dry thoroughly before storing.
4.) The juice-extracting filter should be scrubbed inside out to remove all
traces of pulp.
5.) All removable parts are dishwasher safe except the main power unit.
Should the pulp container be discolored by certain food (such as
carrots), wipe gently with a little vegetable oil on a cloth and wash as
usual.
6.) Do not use harsh or abrasive cleaners.
Cover
Chopping Blade
Jumpstart Manual Final
Thursday, November 13, 2008 12:58:52 PM
