CNI C(G)-310, Manual

Page: 5 / 12

C (G)-310 Main Frame Connector
- 5 –
comtestnetworks.com
6. Changing Stub Position
6.1 The cable stub may be turned 180 degrees
(Figure 6). Handle the cable very carefully to avoid
breaking wires. Be sure that enough clearance is
available for the molded end of the cable stub
above the top of the connector base before using
this method.
6.1.2
Remove cable clamps from pressure plug
and mounting bar.
6.1.3 Turn cable stub 180 degrees.
6.1.4 Reinstall cable clamps in the alternate holes
provided.
6.2 Splice the cable stub to the entrance cable.
The cable is wired with standard cable wire color
coding. Cable pairs can be matched to the central
office jumper field as shown in Table 1.