Engine - Engine and crankcase
Crankcase Liner - Measure
Prior operation:
Crankcase Liner - Remove (10.001)
1. The internal diameter of the cylinder liner is checked
for ovalization, taper, and wear, using a bore dial
(1)
centesimal gauge
(2)
previously set to ring gauge
(3)
,
which has a diameter of
135 mm
(
5.315 in
).
NOTE:
If a
135 mm
(
5.315 in
) is not available, it is accept-
able to use a micrometer.
NHIL13ENG1188AA
1
2. The measurements have to be made on each single
cylinder liner at three different heights and in two differ-
ent positions perpendicular to each other as shown in
the figure.
NHIL13ENG1189AA
2
47869981 01/05/2015
10.1 [10.001] / 9