User’s Manual
Page 1
1.0
OVERVIEW
This board provides 12 electromechanical relays with NO (Normally Open) and NC
(Normally Closed) connections; this version can be easily mounted on control boxes
using DIN rails and can also accommodate ribbon cables.
2.0
FEATURES
•
12 Electromechanical relays with NO and NC positions.
•
Use IDC26 to connect to the ESS, M16D (PoKeys), UC300ETH-5LPT,
AXBB, C25XP, C94 or C76 (UC300ETH).
•
Status LEDs on all relay connections.
•
External Enable Pin (EN). The board has a pin that allows you to
enable/disable all the relays at once.
•
Can be powered and tied to the ENABLE line of the C72, M16D, C25XP
(Rev4) and C94 through IDC26 ribbon cable.
*NEW*.
•
Has terminals to allow access to available input pins.
•
Din rail mountable.
•
Pluggable Screw-On Terminals.
