Page 2
Unboxing your Machine and setup
1.
Look for the screws on the crate that have purple paint on them. Use a Philips head
screw driver or impact driver bit to unscrew the main crate packaging. Once
unscrewed, get a friend to help you carefully lift the crate cover off. This will expose
the machine and components underneath. If you do not have a friend to help you can
unscrew the entire top cover and dismantle the packaging from top down.
2.
Once your machine is exposed you can unscrew the electronics board from the front
of the crate and slide it onto the machines spoil board for easy transport to its home
location bench or table. At this point you can also carefully remove the small parts
accessories box that is hanging onto the Gantry. This usually contains your endmills,
laser goggles, Dust shoe and other accessories you may have purchased with your
machine.
Summary of Contents for QB2
Page 20: ...Page 20 ...
