CNB S2465NX, Installation And Operation Manual

Page: 8 / 42

XPEED Outdoor Series WWW.CNBTEC.COM
8
2. Installation
~
DIP Switch Setup
■ Camera ID Setup
• ID number of camera is set using binary number.
The example is shown below.
Pin 1 2 3 4 5 6 7 8
ID Value 1 2 4 8 16 32 64 128
ex) ID=5 ON OFF ON OFF OFF OFF OFF OFF
Ex) ID=10 OFF ON OFF ON OFF OFF OFF OFF
• The range of ID 1~255. Do not use 0 as camera ID.
• Factory default of Camera ID is 1.
• If you want to control a certain camera, you must match the camera ID with Cam ID setting of
DVR or Controller.
9
Before installing the camera, you should set the DIP switches to configure the camera ID, communication protocol. Do not use the
system upgrade terminal.