CNB IS2765N, Installation And Operation Manual

Page: 36 / 92

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xá |Ñ@åÇxà
36
4. OSD Menu
⊙
Pattern setup
• PATTERN NO. [1~4]
Selects Pattern number to edit. If a selected pattern number is not
defined, “UNDEFINED” will be displayed under selected pattern
number.
• CLR PATTERN [CANCEL/OK]
Deletes data in current pattern.
• EDIT PATTERN Starts editing pattern.
■ EDIT PATTERN
① By using Direction KEY, move to start position with appropriate zoom.
To start pattern recording, press NEAR key. To exit this menu, press FAR key.
② Move camera with Direction KEY or run preset function to memorize the path (mostly curve
path) in a selected pattern. The total memory size and the rest memory size is displayed in the
form of bar.
Maximum 1200 communication commands can be stored in a pattern.
③ To save data and exit, press
NEAR key. To cancel recording and delete record data, press FAR
key.