background image

Reg

u

larl
y

 

Use a soft cloth moistened with hand-warm mildly soapy 
water or household cleaning detergent. Never use metal 
pads, chemical, abrasive material or stiff brush to clean 
the appliance. 

Monthly

 

Metallic anti-grease filter: 

The filter collects grease, 

smoke and dust so the filter is  directly affecting the 
efficiency of the cooker hood. If not cleaned, the grease

 

residue (potential flammable) will saturate on the filter. 
Clean it with household cleaning detergent.

 

 

Important: 

Clean the filter every  month to 

prevent risk of fire.

 

Fault

 

Cause

 

Solution

 

 

The appliance is not 
hung properly on the 
brackets.

 

 

Take down the 
appliance and check it 
is properly fixed.

 

The fan blade is 
damaged.

 

 

 
 
 

Excessive 
vibration.

 

The fan motor is not 
fixed tightly.

 

 

The fan blade is 
jammed.

 

 

 

Light on, but fan 
does not work.

The motor is 
damaged.

 

 

 
 
 

Switch off the 
appliance. Repair to be 
carried out by qualified 
service personnel only.

 

Light bulb broken.

 

Replace with a bulb 
with correct rating.

 

 

Both light and 
fan do not work. Power connection 

loose.

 

 

Check power supply.

 

 

Distance between 
the appliance and

 

the cooking place too 
large.

 

Readjust the distance 
to:

 

Gas cookers: 70cm 
Electric cookers: 66cm 
Coal/oil cookers: 80cm

 

 
 

Suction 
performance 
not good.

 

Metallic anti-grease 
filter is dirty.

 

Clean filters (see

 

Maintenance chapter).

 

 

6. OPERATION 

 

 Switch on the appliance at the switched 

fused connection unit. The appliance is 
ready for operation. 

Functions 

Sliding touch panel  

1. Extractor fan on and off. 
2. Sliding touch panel for extractor fan 
speed control. Also used in combination 
with button -3-. 
3. Lighting on and off. Press the button 
and, while it is flashing, adjust the 
lighting intensity using the sliding touch 
panel -2-. 
4. Enable and disable extractor fan timer. 
5. Filter clean warning display/button. 
Warning of the need to replace the filter 
– press to deactivate once the filter has 
been cleaned or replaced. 
 

Timer:

 the extractor fan works for 2 min. at the 

current speed and another 2 min. at each of the 
lower speeds until it stops and the lighting 
switches off.  
 
 

 

 

 
 
 
 
 
 

7. MAINTENANCE 

 

 Before cleaning, switch the appliance off 

and disconnect the cooker hood from 
power supply. 

 Clean the appliance in the following 

intervals: 

 
 
 
 
 
 
 
 
 
 
 
 

 Replace the metallic anti-grease filters 

and make sure they lock in place. 

 

Light bulb replacement 

 

 This appliance has LED lighting system 

that must be replaced by technician. 

 

 

8. TROUBLESHOOTING

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

9. TECHNICAL DATA

 

 

Power supply:   

 

220-240V~ 50Hz 

Power consumption – Fan:  

2

5

0W 

Power consumption – Luminary: 2 x 

2,9

W Max 

Power consumption – Total:  

255,8

W  

Protection class: 

 

Light bulb:  

 

 

Max. 

2,9

W (

LED

 

10. ENVIRONMENTAL PROTECTION 

  

Waste electrical products should not be 
disposed of with household waste. Please 
recycle where facilities exist. Check with 
your Local Authority or retailer for recycling 
advice. 

60811415.2779.05.2011

Summary of Contents for KONVEX









Reviews: