CNA Group GCLED60BK, Manual

Page: 16 / 32

Troubleshooting
Troubleshooting
Fault Cause Solution
Excessive
Vibration
The Appliance is not hung
properly on the brackets.
Take down the appliance
and check it is properly
fixed.
The fan blade is damaged. Switch off the appliance.
Repair to be carried out by
qualified service personnel
only.
The fan motor is not fixed
tightly.
Light on, but
motor does
not work.
The fan blade is jammed.
The motor is damaged.
Both light and
motor do not
work.
Light bulb blown. Replace with a bulb with
correct rating.
Power connection loose. Check power supply.
Suction
performance
reduced.
Speed may be too low. Select a higher speed.
Distance between the
cooker hood and the hob
is too great.
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
Aluminium grease filter is
dirty.
Clean filters. (see care
and maintenance)
Top vent might be
obstructed. (VHB60SS &
VH60W)
Clear any obstruction.
Optional vent kit might be
twisted.
Ensure that the vent kit is
fitted to the manufacturers
instructions.
Works normally
but cooking
smells linger.
Charcoal filter not fitted
in recirculation mode or
charcoal filter is full of
grease.
Fit charcoal filter if
recirculating or change
the filter. (see care and
maintenance)
LED Light is not
working
The connector plug has
not been inserted correctly
Switch off the appliance
and the remove glass and
check connector plug has
been inserted correctly.
16
In
more
detail...
GB IE