- 11 -
2.
Please note that A0-A7 is the 8 bits address code which must be set to the same code as the alarm
unit. The address code is printed on a small label at the back of the alarm unit.
For example, if your alarm unit's 8 bits address code is 21120101, please place the black jumpers
as follows:
3.
Place jumpers on D0-D3 for setting zones as follows:
Zone
Code
Characteristic
1
2122
2
2211
Not function on Partial ARM mode
3
1111
4
2112
5
2121
6
1211
7
1122
8
1112
9
1212
10
2222
11
2111
12
1221
13
1121
How can I synchronize a wireless keypad to the alarm unit
In case of the alarm unit does not respond to the wireless keypad or you want to add another new
wireless keypad to the alarm system, you have to follow below steps to synchronize it to the alarm unit:
1.
Power off the alarm unit
2.
Screw open the case of the alarm unit
3.
Press and hold the center reset button on the circuit board
4.
Power on the alarm unit by connecting it to the power supply or switching on the internal
backup battery
5.
You will then hear one long and one short beep sound.
6.
Release the center reset button
7.
Press any keys on the wireless keypad
8.
You will hear one long beep sound
9.
Wait for the alarm unit initialization completed
10.
Wireless keypad synchronization completed.
Note: Please take reference to this youtube video:
http://www.youtube.com/watch?v=TVwqu5yEh_4
