Using Bluetooth Devices
cqheadset.com
10
Auto-mute
By default, streaming media via Bluetooth
will not be muted during radio
communications. To temporarily toggle the
internal auto-mute function ON, simply
double click the multi-function button while
Bluetooth is powered on. You will hear a
tone, and the headset will initially mute for
approximately 2 seconds.
With auto-mute enabled, radio or intercom
audio that is of sufficient volume will trigger
the Bluetooth audio stream to temporarily
mute/pause then resume when the radio
traffic is quiet.
To toggle auto-mute OFF, simply double click
the multi-function button again.
To enable auto-mute by default each time
Bluetooth is powered on, change the position
of internal DIP switch #1 to be ON.
To change the default auto-mute mode to
not do a media pause (default) and only
mute the audio output without pausing,
change the position of internal DIP switch #2
to be ON.
The mute toggle double click works no
matter the position of the DIP switches that
control mute default configuration.