cPad – MP Configuration Manual
Documentation Revisionv1.07
6
Initial Configuration
Start-up
The cPad is powered up with an external power supply of 24VDC 1A.
The booting process of a cPad is:
Black screen for about 10 seconds.
White screen with a Cartadis logo for about 1minute 30seconds.
Full white screen for 5 seconds followed by a beep warning, then
a progress bar lasting about 10 seconds. During the progress
display you can enter a code (called the Z code) in order to
access the configuration menu. The Z code is a finger touch in
each corner of the cPad screen in this order: top left, top right,
bottom left, bottom right.
Press each corner in the Z
shape to access the initial
configuration menu.
Tip: an optional additional security feature is enabled for the Z code. If you are
prompted for a pin please contact ‘My Prints’ Support or the network administrator.
The default pin is 23468. It is a recommended you change this PIN. Especially in high
risk environments such as Schools, Libraries, and other Pay-‐Per-‐Use areas.
1
2
3
4
Summary of Contents for cPAD
Page 1: ......
